|
學術期刊:
|
1 : "精密工具機用恆溫冷卻器之性能測試分析", 2006, 12, 冷凍空調技師季刊, (其他,), 8
2 : "無塵室空調系統之量測與熱舒適性分析", 2006, 9, 冷凍空調技師季刊, (其他,), 7
3 : "熱氣旁通冷卻系統於製程冷卻運用之探討", 2007, 12, 冷凍空調技師季刊, (其他,), 12
4 : "使用環保新冷媒之工業用冷卻器系統改善可用能分析", 2007, 3, 冷凍空調技師季刊, (其他), 9
5 : "工業無塵室之現場量測分析與汙染控制探討", 2007, 6, 冷凍空調技師季刊, (其他,), 10
6 : "生化醫療用熱電冷卻恆溫箱之製作與性能分析", 2007, 9, 冷凍空調技師季刊, (其他,), 11
7 : "Economic Feasibility of Waste Heat-to-power Conversion", 2007, 3, Applied Energy, (SCI), 84
8 : "Evaluation of Thermal Comfort and Contamination Control for a Cleanroom", 2008, 5, Journal of Applied sciences, (EI), 8, 9
9 : "無塵室環境品質之檢測程序與確效作業探討", 2008, 2, 機電現場技術, (其他), 34
10 : "使用熱氣旁通溫度控制之工具機用冷卻器", 2008, 7, 機械工業, (其他), 34
11 : "居室使用變頻空調系統之熱舒適度探討", 2008, 5, 電機月刊, (其他), 18, 5
12 : "醫院手術室空調系統之現場量測及性能模擬分析", 2008, 3, 冷凍空調技師季刊, (其他), 13
13 : "A Novel Control Scheme for Temperature Control of Machine Tool Coolers ", 2008, 7, Journal of Applied Sciences, (EI), 8, 13
14 : " Effects of channel width on film condensation in top-closed vertical channel", 2008, 9, Journal of Mechanical Engineering Science, (SCI), 222, 9
15 : "An Analytical Investigation into the Nusselt Number and Entropy Generation Rate of Film Condensation on a Horizontal Plate", 2008, 11, Journal of Mechanical Science and Technology, (SCI), 22, 11
16 : "使用環保冷媒之製程冷卻器性能測試分析", 2008, 9, 冷凍空調技師季刊, (其他), 15
17 : "高科技廠房之無塵室設計分析探討", 2008, 12, 潔淨季刊, (其他), 23
18 : "醫院手術室空調系統之氣流模擬改善分析", 2006, 6, 冷凍空調技師季刊, (其他), 6
19 : "工業用冷卻器系統換裝環保新冷媒之可用能分析", 2006, 4, 冷凍空調技師季刊, (其他), 6
20 : "微機電實驗室潔淨室空調系統之涼測與氣流模擬分析", 2006, 3, 潔淨科技季刊, (其他), 5
21 : "An Analytical Investigation into Filmwise Condensation on a Horizontal Tube in a Porous Medium with Suction at the Tube Surface", 2009, 1, Heat and Mass Transfer, (SCI), 45, 3
22 : "熱電式血液保存運送箱系統之性能測試分析", 2008, 12, 冷凍空調技師, (其他), 4, 4
23 : "The Influence of Alternatives Layout for Air-circulation on Airflow Patterns in the Processing Area of a Cleanroom", 2009, 2, Indoor and Built Environment, (SCI), 18, 1
24 : "利用網路即時監控改善空調系統耗能效率之案列分析", 2009, 3, 中華水電冷凍空調期刊, (其他), 27
25 : "醫院熱水系統之耗能改善分析", 2009, 3, 冷凍空調技師, (其他), 17
26 : "Performance Improvement Analyses for a Cleanroom in MEMS Laboratory", 2009, 4, Journal of the Chinese Society of Mechanical Engineers, (SCI), 30, 2
27 : "醫院手術室空調系統之性能量測與熱舒適分析", 2009, 6, 中華水電冷凍空調期刊, (其他), 30
28 : "應用光觸媒改善生化潔淨室污染控制之量測分析", 2009, 11, 中華水電冷凍空調期刊, (其他), 35
29 : "Performance Evaluation through CFD Simulation and Field Measurement on a Bio-Cleanroom for Vaccine Storage", 2009, 12, Journal of Applied Sciences, (EI), 9, 24
30 : "醫院門診候診區之熱舒適現場量測與評估分析", 2009, 12, 中華水電冷凍空調期刊, (其他), 36
31 : "Performance Improvement of an Operating Room in a Health-care Facility", 2009, 11, Journal of Chung Cheng Institute of Technology, (EI), 38, 1
32 : "半導體廠無塵室減少FFU覆蓋率之系統節能策略分析", 2009, 12, 冷凍空調技師, (其他), 20
33 : "Performance Investigation for the Cleanroom Contamination Control Strategy in an Operating Room", 2010, 4, ASHRAE Transaction, (EI), 116, 1
34 : "運用熱泵熱水系統取代電熱加熱系統之性能量測與驗證分析", 2010, 4, 中華水電冷凍空調期刊, (其它), 40
35 : "Experimental Investigation of a Process Cooling System Retrofitted with HFC-404A Refrigerant for Precise Manufacturing Application", 2011, 2, Journal of Mechanical Science and Technology, (SCI), Vol. 25, No. 2
36 : "Performance Evaluation of Indoor Environment Parameters for an Unoccupied Operating Room", 2011, 3, ASHRAE Transactions, (EI), Vol.117, 1
37 : "Experimental Investigation of a Machine Tool Cooler Using Hot-gas By pass Valves for Temperature Control", 2011, 3, ASHRAE Transactions, (EI), Vol.117, 1
38 : "Performance Analyses for the Design of a Machine Tool Cooler System Retrofitted with Eco-friendly Refrigerants", 2011, 4, Advanced Science Letters, (SCI), Vol. 4 , No. 4
39 : "Inaccuracy of Heat Transfer Characteristics for Pin Fins Considering the Influence of Heat Radiation", 2011, 4, Advanced Materials Research, (EI), 199
40 : "Experimental Evaluation of System Performance for a Machine Tool Cooler Using Inverter Driven Control", 2011, 4, Advanced Materials Research, (EI), Vol 189
41 : "Experimental Investigation of Capacity Control Scheme on System Performance for a Machine Tool Cooler", 2011, 5, Chinese Journal of Mechanical Engineering, (SCI), Vol. 24, , No. 3
42 : "醫院開刀房空調系統之現場量測及節能模擬分析", 2011, 5, 電機月刊, Vol. 21, No. 5
43 : "Improvement of the Indoor Environment and Airborne Contamination Control in an Operating Room", 2011, 6, Advanced Materials Research, (EI), Vol. 255
44 : "Performance Testing of a Thermoelectric Cooler for Medical Application", 2011, 6, Advanced Materials Research, (EI), Vol. 255
45 : "半導體廠冷卻水塔異常泡沫改善案例分析", 2011, 10, 潔淨科技, No. 28
46 : "辦公室使用全熱交換器改善室內空氣品質之量測分析探討", 2011, 12, 中華水電冷凍空調, (其它), 60
47 : "Field evaluation of thermal comfort and indoor environment quality for a hospital in a hot and humid climate ", 2012, HVAC&R Research , (SCI), Vol. 18, no.4, pp. 671-680
48 : "Performance Improvement of an Energy-efficient Biomedical Cleanroom for Vaccine Production", 2012, 8, Advanced Science Letters, (SCI), Vol. 15, pp. 179-182
49 : "Performance Investigation of Capillary Tubes for Machine Tool Coolers Retrofitted with HFC-407C Refrigerant", 2012, Chinese Journal of Mechanical Engineering, (SCI), Vol. 25, No. 5, pp. 933-939
50 : "Alternative Layouts for Air Distribution Improvement of a Computing Data Center", 2013, 4, Advanced Materials Research, (EI), Vol. 677, pp. 282-285
|